Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Eric P.

Pages: 1 2 [3] 4 5 ... 12
31
Versions / 3.5.6
« on: May 02, 2018, 01:02:28 PM »
- Support onvif relay activation for PTZ Dahua DH-SD6ALA230FN-HNI
- Bug fix in VideoWave SDK

32
Versions / 3.5.5
« on: May 02, 2018, 01:02:08 PM »
- Calibration PTZ Dahua DH-SD6ALA230FN-HNI
- Avigilon: fix a camera reconnection problem.
- Minor bug fixes

33
Versions / 3.5.4
« on: May 02, 2018, 01:01:45 PM »
- updated RTSP server for better streaming to MatrixView
- MatrixView: added camera swapping and monitor identification
- initial support for Axis cameras with OneTrack Edge Analytics
- Bug fix: wrong aspect ratio when using a rotated camera image

34
Versions / 3.5.3
« on: May 02, 2018, 01:01:26 PM »
- Bug fix: using 2 relays to switch between 2 profiles
- Bug fix: adjustments to the Minimum Presence trigger
- Bug fix: ptz main stream may freeze for a second when moving
- Calibration PTZ Hikvision DS-2DE7184-AE
- Minor bug fixes

35
Versions / 3.5.2
« on: May 02, 2018, 01:01:04 PM »
- Some tweaks for the OneTrack Atom with 2 cameras
- Calibration of PTZ Hikvision DS-2DE5230W-AE

36
Hikvision / DS-2DE7184-AE 20X
« on: March 15, 2018, 02:58:34 PM »
Version 5.4.71
Protocol: ONVIF
Modes: Absolute unidirectionel
Recommend: Absolute unidirectionel
Tracking modes: AutoTrack & MultiTrack
OneTrack version: 3.5.3

Note: The PTZ uses some discreet zoom levels, but it works well anyway.

37
Versions / 3.5.1
« on: February 08, 2018, 12:08:56 PM »
- Bug fix: mainstream not visible when ptz in record only without analyze.
- Bug fix: video corruption occured with multiple remote users.
- Modified license checking for hard disk serial number. Problem visible when Windows on RAID disk.
- Calibration of PTZ Bosch AUTODOME IP 5000i NDP-5502-Z30
- Updated to OpenCV 3.3.1

38
Bosch / AUTODOME IP 5000i NDP-5502-Z30
« on: January 29, 2018, 10:15:37 AM »
Version 6.42.0021
Protocol: ONVIF
Modes: Absolute bidirectionel, absolute unidirectionel, relative bidirectionel
Recommend: Absolute bidirectionel
Tracking modes: AutoTrack & MultiTrack
OneTrack version: 3.5.1

Notes

In camera web config:
In Encoder Profile, set GOP structure to IP instead of IBP or IBBP. Otherwise, video flicker will be visible.

39
Versions / 3.5.0
« on: January 26, 2018, 01:14:52 PM »
   - Screenshot exporting in Windows 10 bug fix
   - RTSP server is now an independent process
   - Dali thermal camera rtsp stream support
   - Initial version of ExacqVision Bridge
   - Initial version of VideoWave SDK
   - Updated to OpenCV 3.3.0
   - Updated to IPP 2017
   - Updated to VSStudio 2017
   - Corrections to the Genetec Bridge
   - Bounding boxes displayed in OneTrack Mobile

40
Network Cameras / Hikvision enable ONVIF
« on: January 18, 2018, 12:13:33 PM »
Hikvision cameras:
ONVIF is disabled by default in version 5.5.0 or later. To enable, on the web interface:
 - Go to Configuration->Network->Advanced settings-> Integration Protocol
 - Click "enable Onvif"
 - Add a new Onvif user.

See the .pdf attachement for more details

41
Fixed / Arecont Vision AV20275DN
« on: August 11, 2017, 11:07:57 AM »
The Arecont Vision AV20275DN is a 4 sensor camera that must be configured in the OneTrack as 4 distinct rtsp cameras. The following RTSP strings must be used as the main stream:

rtsp:// cam_ip /h264.sdp1?res=full&doublescan=0&ssn=465 {channel 1}
rtsp:// cam_ip /h264.sdp2?res=full&doublescan=0&ssn=466 {channel 2}
rtsp:// cam_ip /h264.sdp3?res=full&doublescan=0&ssn=467 {channel 3}
rtsp:// cam_ip /h264.sdp4?res=full&doublescan=0&ssn=468 {channel 4}

The is no substream available, so more cpu usage is required for each stream.

Onvif protocol must NOT be used and the RTSP strings coming from Onvif must NOT be used. Low framerate and video corruption has been observed when using Onvif.


42
Samsung / Ipolis SNP-6320RH 32X
« on: July 13, 2017, 01:02:38 PM »
Version 1.03
Protocol: ONVIF
Modes: Absolute unidirectionel
Recommend: Absolute unidirectionel
Tracking modes: AutoTrack & MultiTrack
OneTrack version: 3.4.0.1

Notes:
- A substream must be created in the camera via the webpage. 640x360 h264 at 10fps is recommended.
- Only absolute unidirectional is supported because of incoherent values between setposition and getposition.

43
Bosch / AutoDome 700 IP 36X
« on: June 28, 2017, 12:27:12 PM »
Version 5.73
Protocol: ONVIF
Modes: Absolute bidirectionel, absolute unidirectionel, relative bidirectionel
Recommend: Absolute bidirectionel
Tracking modes: AutoTrack & MultiTrack
OneTrack version: 3.4.0

Notes:
The Digital zoom must be turned off in the camera settings (from the web page)
Le zoom Digital doit être désactivé dans les options de la caméra (via la page web)





44
Versions / 3.4.0
« on: March 31, 2017, 12:06:47 PM »
- Initial version of OnvifDiscovery
- Initial version of OnvifServer
- Initial version of Milestone Bridge
- Initial version of Genetec Bridge
- Support the Advantech 6266 IO Network device
- Some bug fixes

45
Versions / 3.3.1
« on: February 20, 2017, 03:37:03 PM »
- 64 bits version of client and server is installed on 64bits OS
- Some bug fixes

Pages: 1 2 [3] 4 5 ... 12